9.1. Test the actual set value defined by
SpChAlmTime
.
9.2. Enable
SPRCHRST
input. Also activate SPRCHRD after a time greater
than set time
SpChAlmTime
.
9.3. At this condition,
SPCHALM
is activated.
10. Test of CB gas pressure indication
10.1. Test the actual set value defined by
tDGasPresAlm
and
tDGasPresLO
.
10.2. The output
GPRESALM
is activated after a time greater than set time of
tDGasPresAlm
value if the input
PRESALM
is enabled.
10.3. The output
GPRESLO
is activated after a set time of
tDGasPresLO
value
if the input
PRESLO
is enabled.
10.12.3.2
Completing the test
GUID-0A16206F-690E-46EF-86F4-5A89E0BF640B v3
1. Continue to test another function or end the test by changing the
Test mode
setting to
Off
.
2. Restore connections and settings to their original values if they were changed
for testing purposes.
10.12.4
Event function EVENT
M11751-2 v5
Prepare the IED for verification of settings as outlined in section
During testing, the IED can be set when in test mode from PST. The functionality
of the event reporting during test mode is set in the Parameter Setting tool in
PCM600.
•
Use event masks
•
Report no events
•
Report all events
In test mode, individual event blocks can be blocked from PCM600.
10.12.5
Limit counter L4UFCNT
GUID-7EBDC372-3407-4577-8B9A-6AB1758A1F34 v2
The Limit counter function L4UFCNT can be tested by connecting a binary input
to the counter and applying pulses to the counter. The speed of the pulses must not
exceed the cycle time of the function. Normally the counter will be tested when
testing the function that the counter is connected to, such as the trip function. When
the function is configured, test it together with the function that operates it. Trigger
the function and check that the counter result corresponds to the number of
operations.
Section 10
1MRK 506 377-UEN C
Testing functionality by secondary injection
168
Railway application RER670 2.2 IEC
Commissioning manual
Summary of Contents for RELION RER670
