address is used and persist, please try a static address instead.
Offline
Point cloud data in JT files can't be imported
Point cloud data in JT files is not imported by RobotStudio.
Issue with collission avoidance for palletizer robots
When configuring collision avoidance for a palletizer robot using RobotWare 6.11, attaching an object to
a mechanism link can result in an error and the configuration will not be loaded.
The YuMi library revision 1 cannot be successfully updated to YuMi revision 2
When opening a Pack&Go file with a station that has a reference to
IRB14000_0.5_0.5__01.rslib
you
get the option to update it to the newer
IRB14000_0.5_0.5__02.rslib
.
The following issues occurs if you select ‘Yes’ and update the model:
The attached parts, for example Smart Grippers, are detached.
The new YuMi robot is not connected to the virtual Controller.
The old YuMi mecanism is converted to a component.
Answer ‘No’ to this question to keep the original revision 1 model and avoid the problems mentioned
above.
RobotStudio needs to be restarted to update a modified library instance
When editing a library file (.rslib) that is used in a currently open station, then RobotStudio needs to be
restarted to update the library. Simply re-opening the station is not enough to update the content of
the station. Unless RobotStudio is restarted, the old library instance will remain in memory and be loaded
even though the underlying file has been updated. This is a known limitation and is expensive to fix.
There is a workaround to the problem, which is to restart RobotStudio.
The robot IRB 1600ID 1.55 m / 6kg replaced by IRB 1660ID1.55 m / 6 kg in RobotWare 6.04
The robot IRB 1600ID 1.55 m / 6 kg is not available in RobotWare 6.04 and later. It has been renamed to
IRB 1660ID 1.55 m / 6 kg. Virtual controller systems for IRB 1600ID 1.55 m / 6 kg based on RobotWare 6.03
cannot upgraded to RobotWare 6.04 and later. This means that Pack&Go files for this robot based on
RobotWare 6.03 cannot be upgraded to RobotWare 6.04 automatically
Workaround:
Re-build or modify the virtual controller system to use IRB 1660ID 1.55 m / 6 kg instead
when using RobotWare 6.04 or later.
FlexPendant and RAPID applications run with logged in user rights
A FlexPendant or RAPID application running on the virtual controller runs with the rights of
the logged-in Windows user. RAPID applications running in a background task will start to execute when
the Pack&Go file is opened and FlexPendant applications will start to execute when the user starts the
Virtual FlexPendant. A warning message has been added to the Unpack&Work wizard to make the user
aware that only Pack&Go files (.rspag) from trusted sources shall be opened.
© Copyright 2021 ABB. All rights reserved.
19/30
