![background image](http://html.mh-extra.com/html/abb/sace-emax-2-e2-2/sace-emax-2-e2-2_disassembly-instructions-manual_3045201059.webp)
59
Disassembly instruction emaX 2 e2.2
6.14 PHASE 14 – POLES
Actions to be performed
Tools
No. 10
No. 25
Torx key
Allen key
222
By means of the allen key unscrew the 2 screws
fixing the sensor cover to the pole.
225
By means of the flat screwdriver remove the
cables cover and after manually remove the
wire.
227
Manually remove the sensor.
224
By means of the torx key (size 10) unscrew the
screw fixing the wire to the pole.
226
By means of the flat screwdriver unhook the
sensor plug mounted below the sensor and
after manually remove the sensor plug.
.
223
Manually remove the sensor cover.
4mm
Flat screwdriver
Hammer
Cross screwdriver
Rod Ø5mm
Min. 200mm