ABB | SACE Emax 2
Emax E2.2-E4.2-E6.2 circuit-breakers | 2 - Transport and checking on receipt
7 | © 2013
ABB |
1SDH001000R0002 - L7804
2 - Transport and checking on receipt
Introduction
The Emax 2 circuit-breakers, on account of their weight, require special attention during
transport and handling.
They are distributed with following packages:
• single package for fixed circuit-breaker
• two packages for withdrawable circuit-breakers (one package for the fixed part and one
for the mobile part).
The following notes regard transport, handling and storage.
Weight of the circuit-breakers
with packaging
The following table specifies the weights of the circuit-breakers with packaging:
Fixed
Moving part of
withdrawable device
Fixed part of
withdrawable device
III
IV
Fs
III
IV
Fs
III
IV
Fs
E2.2
46
58
53
60
41
49
E4.2
63
77
67
81
57
69
E6.2
118
134
151
129
143
159
96
109
123
NOTE:
•
weights are indicated with reference to the basic circuit-breakers including
protection release and its sensors, without terminals and without accessories.
•
the weights of the fixed part of withdrawable circuit-breakers refer to the version
with horizontal rear terminals.
Transport of the packaged
circuit-breaker
Consult the table "Weight of the circuit-breakers with packaging" before proceeding with the
transport.
WARNING! Improper lifting can result in death, serious injury to persons and
damage to the equipment. Never lift a circuit-breaker and / or a fixed part
above other people.
IMPORTANT: The trained personnel in charge of handling and lifting must use
appropriate safety equipment.
