ABB | SACE Emax 2
Putting into service and maintenance | 5 - Second level maintenance
261 | © 2013
ABB |
1SDH001000R0002 - L7804
Cleaning and lubrication of the
operating mechanism
To clean and lubricate:
1. Clean the closing hook, the closing shaft, opening hook and opening shaft in the points
indicated by the illustrations. In the case of excessive deposits you can use a thinner
laminate of the type Henkel 273471 or equivalent.
2. Lubricate closing hook, the closing shaft, opening hook and opening shaft in the points
indicated by the illustrations with Mobilgrease 28 grease (EXXON MOBIL).
3. Make sure that the opening and closing shafts are free to turn.
Figure 102 - Lubricating the shaft and closing hook
Figure 103 - Lubricating the closing hook
Figure 104 - Lubricating the shaft and opening hook
Continued on the next page