ABB | SACE Emax 2
78 | © 2013
ABB |
1SDH001000R0002 - L7804
Ekip Touch protection release | 7 - Insertion of the password
7 - Insertion of the password
Description
The page for the insertion of the password is open if a parameter to be set is selected, or the
menu
Test
, or if you want to change the password.
NOTE:
insertion of the password is requested, if:
•
The password has never been inserted.
•
After programming has been cancelled.
•
After a few minutes of inactivity have passed.
The password is composed of five digits, each of which can have a value from 0 to 9.
The default value is “00001”, and it must be modified after the first switch-on in order to
prevent access to parameters and tests by unauthorized personnel.
In order to modify the password, from the menu
Settings
, you need to select
System
,
New
Password.
Components of the page
The page appears as follows:
C
D
*
*
*
*
0
A
B
E
Password
Confirm
Figure 78
The following table provides a description of the various areas of the page:
Pos. Function
A
Cancels the operation, and opens the start menu.
B
Shows the name of the page.
C
Keys to increment and decrement the corresponding digit.
D
It displays the digits of the password.
E
Confirm
key:
• Confirmation after inserting a digit in a position from 1 to 4 will automatically
bring you to the next digit.
• When the fifth digit is confirmed, the entire password is confirmed and the
selected page is opened.
NOTE:
The Confirm key must be pressed every time you want to confirm a digit.
Continued on the next page
