ABB | SACE Emax 2
Ekip Touch protection trip unit | 22 - Default parameters
129 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
22 - Default parameters
Ekip Touch default parameters
The Ekip Touch trip units are supplied with the following default parameters:
Protection/Parameter
Value
(1)
L
1 In; 144 s; pre-alarm: 90 %
S
(2)
Off; 2 In; 50 ms; Curve: t = k
I
4 In
G
(2)
Off; 0.2 In; 400 ms; Curve: t = k
2I
Off; 1.5 In
MCR
Off; 6 In; 40 ms
IU
Off; 50%; 5 s
OT
Off
I1 current thresholds
Off; 1: 50 %; 2: 75 %
Current thresholds
Off; Iw1: 3 In; Iw2: 3 In
Harmonic Distortion
On
Gext
(2) (3)
Off; 0.2 In; 400 ms; Curve: t = k
Rc
(3)
Off; 3 A; 60 ms
Frequency
50 Hz (IEC) / 60 Hz (UL)
Neutral
Off (for circuit breakers three-pole)
50 % (for four-pole circuit-breaker)
Datalogger
Off
Power Controller
See note
(4)
Hardware Trip
Disabled
Monitor time
5 minutes
Local Bus
Disabled
Alive LED
Disabled
Language
English
Password
00001
Mode
Local
Modbus RTU par
Address: 247; baudrate: 19.2 Kbit/s
Profibus
Address: 125
DeviceNet™
MAC ID: 63; baudrate: 125 Kbit/s
Modbus TCP/IP
Static IP: 0.0.0.0
Maintenance
Off
(1)
Thermal memory, startup, Zone Selectivity set to Off.
(2)
S Protection available with LSI and LSIG versions of the trip unit. G Protection available with LSIG version.
(3)
Protections available if the respective toroids (S.G.R. or Rc) are present.
(4)
Protection activated on request when purchasing the trip unit.
The protections activated by the presence of the Ekip Measuring Pro module, have the following default
parameters:
Protection/Parameter
Value
VU
Off; 50%; 5 s
UV
Off; 0.9 Un; 5 s
OV
Off; 1.05 Un; 5 s
UF
Off; 0.9 fn; 3 s
OF
Off; 1.1 fn; 3 s
RP
Off; 0.1 Sn; 10 s
Phase Sequence
1-2-3
Cos
φ
Off; 0.95
Continued on the next page
Summary of Contents for SACE Emax E1.2
Page 2: ...ABB SACE Emax 2 2 2017 ABB 1SDH001330R0002 ECN000058721 Rev A ...
Page 8: ...VI 2017 ABB SACE Emax 2 1SDH001330R0002 ECN000058721 Rev A ...
Page 9: ...ABB SACE Emax 2 3 2017 ABB 1SDH001330R0002 ECN000058721 Rev A ...
Page 310: ...ABB SACE Emax 2 304 2017 ABB 1SDH001330R0002 ECN000058721 Rev A Service 1 Power Care ...