1SDH002031A1002 ECN000092998 Rev. B
SACE Tmax XT2
– XT4 | 31
12 - Change parameters and commands
Change
parameters
To change one or more parameters follow the procedure below.
IMPORTANT: parameters can be changed with the Trip unit in Local mode and
with no timing alarms
Step
Description
1
Press the Enter button to select the parameter you want to change and enter the
password, if requested.
2
Select the desired new value using the
Right/Up
and
Left/Down
buttons:
from the list showing all available values
with bar min/max
:
Figure 15
3
Pressing the
Enter
button selects the desired value.
The display automatically shows the submenu of the higher level and the changed
parameter shows a confirmation check mark:
Figure 16
At this point it is possible to confirm the programming (Step 4) or to access other
parameters for further changes (Step 1).
4
Press the
ESC
button to return to the previous menu until the
Programming
page
appears.
The
Programming
page accepts different commands:
Confirm
to validate the new parameters and complete the programming
Cancel
to exit without saving
Change
to return to the menus and change the parameter
Figure 17
Use the
Right/Up
and
Left/Down
buttons to move to the desired item, and confirm
by pressing the
Enter
button.
Summary of Contents for SACE Tmax XT2
