1SDH002031A1002 ECN000092998 Rev. B
SACE Tmax XT2
– XT4 | 26
11 - Menu
Introduction
By pressing the
Enter
or
ESC
button on the main page it is possible to access the various menus
of the Trip unit.
Figure 13
Using the
Enter
,
ESC
,
Right/Up
, and
Left/Down
it is possible to navigate within the menus and
their respective submenus, which show:
Parameters that can be set
Information and measurements
Commands that can be executed
Elements of each
item
Each item in the submenus consists of:
Submenu name
Current value (white text on a black background)
Other possible values (black text on a white background)
Figure 14
Protections Menu
In the
Protections
menu it is possible to configure the following protections
(1)
:
Name
Parameters
SW package
Page
L
List and description in the dedicated chapter
Standard
Protections
S
List and description in the dedicated chapter
S2
List and description in the dedicated chapter
I
List and description in the dedicated chapter
G
(2)
List and description in the dedicated chapter
NOTES:
(1) if the
Adaptive Protections
package is available (page 65) and
Dual Setting has
been enabled (page 65)
, an intermediate menu is made available before the list
of protections for the selection of the setting (Setting A / Setting B)
(2) available for LSIG versions
Summary of Contents for SACE Tmax XT2
