2TLC172249M0201, REV. C 2021-10-12
4
1
Introduction
Scope
The purpose of these instructions is to describe the non-contact coded safety switch Sense7-series, and to
provide the necessary information required for assembly, installation, operations, checks and adjustments
after installation, and maintenance. The instructions also include information necessary to connect Sense7
to a safety circuit.
Audience
This document is intended for authorized personnel.
Prerequisites
It is assumed that the reader of this document has knowledge of the following:
•
Basic knowledge of ABB Electrification Sweden AB products.
•
Knowledge of safety devices.
•
Knowledge of machine safety.
Special notes
Pay attention to the following special notes in the document:
Warning!
Danger of severe personal injury!
An instruction or procedure which, if not carried out correctly, may result in injury to the tech-
nician or other personnel.
Caution!
Danger of damage to the equipment!
An instruction or procedure which, if not carried out correctly, may damage the equipment.
NB:
Notes are used to provide important or explanatory information.
