SM500F
Field mountable paperless recorder
4 Operation
34
IM/SM500F Rev. Z
Note.
If 'Security system' is set to 'Advanced'
and
'Acknowledge Security' is set
to 'On'(see Section 7.6.4, page 78), alarms can be acknowledged only by Users
with alarm acknowledgement privileges – see Section 7.6.5, page 80.
To acknowledge a particular alarm, use the
and
keys to highlight it in the
menu and press the
key.
Note.
Active unacknowledged alarms in the current process group are identified
by a flashing Alarm Event icon to the right of the associated channel reading. Active
acknowledged alarms are identified by a continuous Alarm Event icon – see item
6
To acknowledge all active alarms in the current process group simultaneously,
select 'All' and press the
key.
Note.
If an alarm in
the other
process group is active, the Global Alarm status icon
(
) continues to be displayed in the status bar. If an active alarm in
the other
process group is unacknowledged, the icon is surrounded by a red (color
recorders) or white (monochrome recorders) flashing border.
If 'Acknowledge Timeout' is set to 'On' (see Section 7.8.4, page 106) and
the alarm condition for an acknowledged alarm is not cleared within the
configured timeout period, the acknowledge state is reset to
active/unacknowledged.
Alarms that have not been configured are greyed-out in the menu (color recorders)
or are blanked-out when selected in the menu (monochrome recorders).
Select to display the chart for each configured process group in turn for 20
seconds. The AutoView Scroll icon (
) is displayed in the status bar at the top of
the screen when AutoView Scroll is active. Press any key to cancel AutoView
Scroll.
If only one process group is enabled, AutoView Scroll is greyed-out in the menu
(color recorders) or is blanked-out when selected in the menu (monochrome
recorders).
