![background image](http://html.mh-extra.com/html/abb/smartac/smartac_applications-manual_170015.webp)
2 Installation
2.1 Safety instructions
WARNING
The power supply must always be switched off whenever work is carried out in
the control cabinet.
CAUTION
Circuit boards - printed circuit boards and components - must never be handled
without electrostatic discharge (ESD) protection in order not to damage them.
Use the wrist strap located on the inside of the controller door.
WARNING
All personnel working with the robot system must be very familiar with the safety
regulations, see
. Incorrect operation can damage the robot
or injure someone.
Application manual - SmarTac
15
3HAC024845-001 Revision: A
© Copyright 2004-2016 ABB. All rights reserved.
2 Installation
2.1 Safety instructions
Summary of Contents for SmarTac
