Advanced Videographic Recorder
SM2000
2 OPERATION
24
IM/SM2000
Issue 11
Select the Configuration Level – see Section 4, page 45.
Select the Setup Level – see Section 3, page 29.
Select the entries to be displayed in the log.
Indicates entries currently displayed.
Note.
Hiding and displaying log entries does not affect the recording of events in the log.
All selected alarm event transitions (from inactive to active, from active to
acknowledged, from acknowledged to inactive, from active to inactive) appear in
the sequence in which they occurred.
Selecting 'Active Transitions Only' displays entries for alarms when made active
and hides all acknowledged & inactive transitions.
The Alarm Event log is not group specific. To acknowledge a particular alarm, use the
,
and
keys to first select the relevant process group, followed by the alarm
to be acknowledged.
To acknowledge all active alarms in the selected process group simultaneously, select
'All' and press the
key.
Note.
If an alarm in
the other
process group is active, the Global Alarm status icon (
)
continues to be displayed in the status bar. If an active alarm in
the other
process group
is unacknowledged, the icon is surrounded by a red flashing border (
).
If neither alarm on a particular channel is configured, the short channel tag is shown
greyed-out in the menu.
