INTRODUCTION
E
-
1
APPENDIX E - PTS PRESSURE TRANSMITTER
INTRODUCTION
This appendix covers the configuration and calibration functions of
the PTS Pressure Transmitter.
Refer to
in Section 4 for information on
the following functions:
NOTE:
To change calibration or configuration parameters of a smart
field device that is connected to an IMFBS01 module, the device
must be taken off-line. This is done at the INFI 90 OPEN console.
CREATE/MODIFY CONFIGURATION
A configuration can be created off-line, without a connected field
device. Refer to Figure
for an overview of the configuration
function. The following table details the configuration process.
•
Send configurations.
•
Select configurations.
•
Get configurations.
•
Erase configurations.
•
View configurations.
•
Operational functions.
Figure E-1. Configuration Flowchart (PTS)
T01341A
ENTER DAMPING
CONSTANT
ID TAG
SELECT MODE
ENTER
CHANNEL
NUMBER
SAVE
CONFIGURATION
DIGITAL
ANALOG
SELECT
TRANSMITTER
TYPE
ENTER
SECONDARY
UNITS
SELECT
INITIALIZE
MODE
SELECT FAIL
MODE
ENTER UPPER
TEMPERATURE
ALARM
SELECT
OUTPUT TYPE
ENTER
SECONDARY
LOWER RANGE
ENTER
SECONDARY
UPPER RANGE
SELECT
ENGINEERING
UNITS
ENTER LOWER
RANGE VALUE
ENTER UPPER
RANGE VALUE
C
O
N
F
I
G
U
R
E
SELECT
OUTPUT
ACTION
ENTER LOWER
TEMPERATURE
ALARM
