PTS PRESSURE TRANSMITTER
CREATE/MODIFY CONFIGURATION
E - 2
Key
Display
Comments
Select
NEW
to create a configuration. To modify an
existing configuration, select
MODIFY
. The screen
sequence is the same, however, the
MODIFY
screens will appear with the values and arrow posi-
tions as they were originally configured.
Select
ABB FSK
.
Use the down arrow key to select
PTS
.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select
ANALOG.
NOTE:
The DIGITAL
selection should only be made
when using an IMFBS01 field bus I/O module. A
CHANNEL #
prompt appears when
DIGITAL
is
selected.
Select
LINEAR
. For a function generator example,
refer to
Use
to return to a previous configuration
screen from any screen in the configuration process.
Use the arrow keys to select an output action.
Enter a value between 0 and 32 seconds.
C O N F IG
CONFIGURATION
→
NEW
MODIFY
ERASE
E N T E R
DEVICE TYPE
→
ABB FSK
HART
E N T E R
TRANSMITTER TYPE
→
PTS
EQS
BCN
EQN
AVS
TB480 cond
E N T E R
STT04 CONFIGURATION
[
]
←
PREVIOUS NEXT
→
E N T E R
SELECT MODE:
→
ANALOG
DIGITAL
E N T E R
OUTPUT TYPE:
→
LINEAR
SQUARE ROOT
3/2 FLOW MODE
BACK
E N T E R
OUTPUT ACTION:
→
NORMAL
REVERSE
E N T E R
DAMPING:
(0 - 32 SEC)
_ nn.nn SEC
