TBN580 TRANSMITTER
CREATE/MODIFY CONFIGURATION
K - 2
Key
Display
Comments
To create a new configuration, select
NEW
. To mod-
ify an existing configuration, select
MODIFY.
The
screen sequence is the same, however, the
MODIFY
screens will appear with the values and cursor posi-
tions as originally configured.
Select
ABB FSK
as device type.
Use the down arrow key and select
TB580 pH
.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select
ANALOG
.
For this example, select
STANDARD
.
STANDARD
: thermo-isopotential 7.0 pH;
slope 59.15 mV at 25
°
C.
ANTIMONY
: isopotential 1.5 pH; slope 51 mV
at 25
°
C.
NOTE:
If after selecting
ANTIMONY,
the STT04 ter-
minal branches to a
TEMPERATURE DISPLAY
UNITS
selection screen, choose the desired temper-
ature unit.
C O N F IG
CONFIGURATION
→
NEW
MODIFY
ERASE
E N T E R
DEVICE TYPE
→
ABB FSK
HART
E N T E R
TRANSMITTER TYPE
BCN
EQN
AVS
TB480 cond
→
TB580 pH TB581 ORP
E N T E R
STT04 CONFIGURATION
[
]
←
PREVIOUS
NEXT
→
E N T E R
SELECT MODE:
→
ANALOG
DIGITAL
E N T E R
pH SENSOR INPUT
→
STANDARD
ANTIMONY
