STT04 DOWNLINK SOFTWARE
SECURITY
O - 4
6. Remove the Password Key disk and store in a safe and secure
location with limited access. Only
Supervisor
security level personnel
should have access to the Password Key disk.
Bypass
Use this function to bypass the security feature. When
Bypass
is
selected no password is required to access any or all of the function-
ality of DownLink software including overwriting, editing and deleting
configurations.
Disable Password Security
1. Start the Password program. Refer to
2. Insert the Password Key disk into the appropriate floppy disk
drive.
3. Click
Key
and type the appropriate floppy disk drive letter (i.e., A:)
and click
Verify
. The screen shown in Figure
appears.
4. Click
Password
and select
Bypass
. A message appears warning
of the significance of bypassing security.
5. Click
Yes
to bypass security.
Enable Password Security
1. Start the Password program. Refer to
2. Insert the Password Key disk into the appropriate floppy disk
drive.
3. Click
Key
and type the appropriate floppy disk drive letter (i.e.,
A:) and click
Verify
. The screen shown in Figure
appears.
4. Click
Password
and select
Delete
.
5. Select
PASSWORD BYPASS
and click
Delete
.
6. Remove the Password Key disk and store in a safe and secure
location with limited access. Only
Supervisor
security level personnel
should have access to the Password Key disk.
View User Names
Use this function to view a list of user names.
1. Start the Password program. Refer to
