INTRODUCTION
P
-
1
APPENDIX P - AS800 PRESSURE TRANSMITTER
INTRODUCTION
This appendix covers the configuration and calibration functions of
the AS800 Pressure Transmitter.
Refer to
in Section 4 for information on
the following functions:
NOTE:
To change calibration or configuration parameters of a smart
field device that is connected to an IMFBS01 module, the device
must be taken off-line. This is done at the INFI 90 OPEN console.
CREATE/MODIFY CONFIGURATION
A configuration can be created off-line, without a connected field
device. Refer to Figure
for an overview of the configuration
function. The following table details the configuration process.
The STT04 does not suppport configuration of the AS800 transfer
function or controller function.
•
Send configurations.
•
Select configurations.
•
Get configurations.
•
Erase configurations.
•
View configurations.
•
Operational functions.
Figure P-1. Configuration Flowchart (AS800)
