IMPORTANT: Read
and understand all of the
instructions and safety information in this manual
before operating or servicing this tool.
1.0
GENERAL INFORMATION
HE.17454 / TA04928 D Page 2 of 12
PURPOSE OF THIS MANUAL
1.3
This manual is intended to familiarize all
personnel with the safe operation and
maintenance procedures for the following
THOMAS & BETTS tool:
BAT22-6NV2 Battery-powered Crimping Tool
Keep this manual available to all personnel.
Replacement manuals are available upon request
at no charge.
All specifications are nominal and may change as
design improvements occur. THOMAS & BETTS
shall not be liable for damages resulting from
misapplication or misuse of its products.
CrimpALL and Kwik Cycle are registered
trademarks of Textron Innovations Inc.
Teflon is a registered trademark of Dupont.
SAFETY
1.2
Safety is essential in the use and maintenance of
THOMAS & BETTS tools and equipment. This
manual and any markings on the tool provide
information for avoiding hazards and unsafe
practices related to the use of this tool. Observe
all of the safety information provided.
The BAT22-6NV2 Battery-powered Crimping Tool
is a hand-held, self-contained crimping tool
intended to crimp terminals, splices, and
disconnects on 22 AWG though 6 AWG wires
using appropriate dies.
DESCRIPTION
1.1
13mm Die Pins
