15
Standard Displays
Items that appear on the unit’s display are programmable by the user,
however based on the measurement application; units will be shipped
with some default display items. The following table is a typical set of
default displays for an AGA-3 application. Engineering units may vary
from those shown if the unit supports the “Selectable Units” feature.
Description Standard
Display
Current Date and Time
24 hour clock
DATE/TIME
MM/DD/YY HH:MM:SS
Yesterday’s Percent DP Low Limit
Percent time below DP Low Set Point
Yest DP Low
NN
PERCENT
Yesterday’s Percent DP High Limit
Percent time above DP High Set Point
Yest DP High
NN
PERCENT
Current Flow Rate
Programmable SCF, MCF or MMCF
Flow Rate
NNNNNN.N
SCF/HR
Total Accumulated Volume
Programmable SCF, MCF or MMCF
Total Accum. Volume
NNNNNN.NN
MCF
Battery Voltage
Displayed in Volts
Battery Voltage
NN.N
VOLTS
Station ID
ID of the box.
Station ID
Differential Pressure
Inches H2O
Diff. Pressure
NNN.N IN. H2O
Static Pressure Absolute
PSIA
Static Pressure
NNN.N
PSIA
Flowing Temperature
°
F
Temperature
NN.N DEG. F
Yesterday’s Volume
Programmable SCF, MCF or MMCF
Yesterday’s Volume
NNNN.N
MCF
Previous Calculation Period Volume
Last Calc. Volume
NNNN.N
SCF
Device ID
Individual application ID
Device ID
Charger Voltage
Charger
NN.N
VOLTS
The duration that each parameter is displayed can vary from 1 to 255
seconds (default is 4 seconds); a setting of 0 seconds will turn that
display item off.
