Primary Switch Mode Inverter
UNV-F
Operation Manual
Page 15 (28)
BHB.UNV-F.D65-1050.HB101
Basic menu PM1 is available for all users
Service menu PM2 is for service personnel only. PM2 has
a code protection to protect against unallowed parameter
changes.
In operation mode the top display shows the output voltage
and the bottom display shows the output current.
For adjustment of parameters in basic menu PM1 the follow-
ing procedure has to be carried out:
1. press both keys UP/DOWN( ) together for a short time;
the inverter changes to adjustment mode
2. press the key UP( ) or DOWN( ) to change the
adjustment parameter (see also table on bottom)
3. press both keys UP/DOWN( ) together for a short time;
the inverter changes to value change mode
4. press the key UP( ) or DOWN( ) to change the
adjustment value
5. press both keys UP/DOWN( ) together for a short time;
the inverter changes back to adjustment mode (the upper
display shows a horizontal line / the changed value is
stored at this moment)
6. press both keys UP/DOWN( ) for appr. 3 sec. to change
back into operation mode
Adjustable parameters in PM1 (see a)):
