1
5
7
2
1
8
6
3
M ED I U M VO LTAG E P R O D U C T S
15
15
Truck
The truck requires visual inspection of hardware,
lubrication, and operation during routine
maintenance.
With the circuit breaker outside the cell, verify all
visible hardware tightness, including handles (1)
and wheels (2). Wheels should rotate freely by hand
movement. Replace or tighten any missing or loose
hardware.
With the circuit breaker outside the cell, rotate the
racking screw as though racking the circuit breaker
to the Connect position.
This process will expose surfaces inside the truck
that need to be inspected and lubricated. Lubricate
the exposed parts; specifically the entire Racking
Screw (4. Inspect the circuit breaker locking tabs (3)
for any damage. Return truck to the Disconnect
position. As a precaution, do not operate the circuit
breaker outside the cell unless the truck is in the full
Disconnect position.
Truck
(shown with circuit breaker removed)
1 Handles
2 Weels
3 Locking tab
4 Racking screw
5 Secondary plug
6 Racking screw collar
7 -RL2
8 Truck locator channel
Fig. 4
Summary of Contents for VM1/A/P
Page 49: ...MEDIUM VOLTAGE PRODUCTS 49 49 ...
Page 51: ...MEDIUM VOLTAGE PRODUCTS 51 51 ...
Page 53: ...MEDIUM VOLTAGE PRODUCTS 53 53 ...
