background image

1

2

18

VM1 

- USER MANUAL

Fig. 10

7.   Operation

7.3.2.   Interlocks in the case where ABB 

withdrawable trucks are used 

1)  The VM1 circuit breaker can only be closed by 

means of the logical input when a voltage of 24 
V - 240 V AC/DC is applied (electric lock on 
closing).

2)  The VM1 circuit breaker can only be closed 

when the withdrawable truck is in the test or 
service position. In intermediate positions the 
closing lock voltage is cut off by the auxiliary 
contacts.

3)  A mechanical interlock positioned on the 

withdrawable truck prevents a closed circuit 
breaker from being moved from the test 
position to the service position. 

4)  MV1 circuit breaker can only be racked-in/

isolated if the locking electromagnet in the 
truck is supplied and the apparatus (as well as 
being open) is in the “READY” state.

7.2.   Principle of extinction of the 

vacuum interrupter

Given the relatively low static pressure of the 
interruption chamber (between 10

-4

 and 10

-8

 hPa), 

a relatively limited distance between the contacts 
is required to obtain high dielectric strength. The 
vacuum arc is extinguished on the first passage of 
the current through natural zero.
Considering the limited distance between the 
contacts, the high conductivity of the plasma of 
metallic vapours, the drop in voltage of the arc 
and, moreover, the short arcing time, the energy 
associated with the arc is extremely limited, 
therefore producing benefits for the useful life of 
the contacts obtained and, consequently, for the 
useful life of the vacuum interrupters. 

7.3.   Interlocks

7.3.1.   Interlocks / protection against 

malfunction (for withdrawable circuit 
breakers for ABB switchgear)

A series of interlocks is provided to prevent 
incorrect operations and/or malfunctions. The 
interlocks are the following:

• 

the withdrawable truck can only be moved from 
the test/isolated position to the service position 
(and vice versa) if the circuit breaker is open (this 
means that first of all the circuit breaker must be 
opened).

• 

the circuit breaker can be closed if the 
withdrawable truck is exactly in the defined test 
position or in the service position (electric 
interlock).

• 

the circuit breaker can be opened manually in the 
service or test position when it is not powered, 
but it cannot be closed.

• 

the switchgear is provided with devices which only 
allow connection and disconnection of the plug 
connector (1) (fig. 10) in the test/isolation 
position.

Any detailed information regarding additional 
interlocks, e.g. in connection with the earthing 
switch operating mechanism, is given in the 
specific order documentation.

Summary of Contents for VM1





























































Reviews: