ABB Welcome
®
— 38 —
5.4
Round pushbutton outdoor station with IC or NFC
Enroll the cards
For the round pushbutton module with NFC or IC card reader, cards can be enrolled or deleted. A maximum of 500 cards can be supported.
Programming
Function
Command
LED
Create admin card
Swipe card 1x
Green
Enter settings
Swipe admin card 1x
Orange
The system will designate the first card swiped within 60 seconds after
powering up the system as the admin card.
After entering settings, the following functionalities can be implemented:
Function
Command
LED
Enroll user
Swipe admin card 1x
Orange flash 1x
Swipe card (new user) 1x
Green
Delete user
Swipe admin card 2x
Orange flash 2x
Swipe card (user x) 1x
Green
Enroll new admin
Swipe admin card 3x
Orange flash 3x
Swipe card (new admin) 1x
Green
Delete admin
Swipe admin card 4x
Orange flash 4x
Swipe card (admin x) 1x
Green
Delete all users
Swipe admin card 5x
Orange flash quickly
Swipe admin card 1x
Green
During setting, please swipe the same admin card.
Function
Command
LED
Exit settings
Swipe admin card 1x or no cards
swiped within 15 seconds
——
Open a door
Function
Command
LED
Open a door
Swipe the enrolled keycard or mobile
phone with “Door Open” App installed.
Green
Summary of Contents for Welcome 5101 P Series
