GUID-86B29BA2-DF27-41CE-9359-F0DA0D7DFA32 V1 EN
Figure 19:
Selecting stp protocol mode
4.
In the
Priority
box, type a value, for example 8000, for test purposes.
5.
Click
OK
to confirm.
6.1.4.3
Configuring ports
1.
Click
Ports
to configure the port and to add bridge ports to the interface.
2.
Select the bridge port.
3.
Select the
Ports
tab.
4.
Click
to add a new port.
5.
In the
Interface
list, click the correct interface, for example ether1.
6.
In the
Bridge
list, click
bridge1
.
Leave the values in the
Priority
and
Path Cost
boxes as shown in the figure.
Section 6
1MRS755551 B
Configuring
26
WGA631
Installation and commissioning manual
