6.
Insert Frames and Cover plate
Insert the Trim frame VMS
in the IP cover plate and re-
install the assembly onto
the VMS box. Check first
needed width of trim frame
VMS and break off where
necessary.
1 Trim Frame
2 IP cover plate
3 Cover plate screws (4x)
First place front frame Xx XLP00
around device(s), then mount
reserve section cover - Z onto
the IP cover plate and reinstall
this assembly onto the VMS box.
1 Front frame
2 Reserve section cover - Z
3 IP cover plate
4 Cover plate screws (4x)
- When using
1x XLP00
, use
Front frame 1x XLP00 and close
opening with adjusted Reserve
section covers - flat.
- When using
1x XLP1
, no addi-
tional accessories are needed.
1 Reserve sections covers - flat
9
