89
1
O PER AT I O N , M A I N T EN A N C E , A N D I N S TA L L AT I O N G U I D E
5.5.6.2 Access from the display /
Ekip Com EtherNet/IP
With modules connected and energized,
the presence of the modules on the mod-
ule slot activates additional menus on
the display:
• To set the addressing of the modules.
• In order to display information on the
modules.
The following table illustrates the path
from the display, for setting the function
and addressing of the modules:
Settings (*Default value)
Description
:
Modules (Optional modules)
Ekip Com EtherNet/IP
Force Static IP address
Off*
Dynamic IP address.
On
Static IP address.
Static IP Address
Displayed with static IP Address enabled, it
must be selected in order to insert the IP
Address of the modules.
Static Network Mask
Displayed with static IP Address enabled, it
must be selected in order to insert the subnet
mask of the modules.
Static Gateway addr
Displayed with static IP Address enabled, it
must be selected in the presence of multiple
subnets, in order to insert the IP Address of
the node to which the modules are connected.
:
—
Table 5.24 The path for setting the function and addressing of the modules
of the Ekip Com Ethernet/IP -module from the display
Summary of Contents for Zenith ZTG T Series
