www.ABBALightingUSA.com
Insert the aligned ends of the wires into the wire nut,
ensuring that they go all the way in. The bare ends
should be completely covered by the wire nut. Twist
the wire nut: Firmly twist the wire nut clockwise onto
the wires, ensuring a secure connection. Continue
twisting until the wire nut is tight and snug. Test the
connection: Gently tug on each wire to ensure they
are securely held by the wire nut. The connection
should be firm and not come loose. Inspect the
connection: Examine the wire nut connection to
ensure there are no exposed wires or loose strands. If
any issues are detected, remove the wire nut and
repeat the process from step 5.
Note: It's always recommended to follow local
electrical codes and regulations when performing any
electrical work. If you're uncertain or uncomfortable
with electrical tasks, it's advisable to consult a
qualified electrician. Safety should always be a top
priority when working with electrical connections.
6. For a secure and stable mounting, dig a small hole
and insert the spike into the ground, ensuring it is
vertical and firm.
7.Once the fixture(s) are securely installed, turn on
the power and enjoy the enhanced lighting
experience!
We strongly recommend that the main cable from the
transformer be buried underground for safety
reasons. Additionally, please be sure to avoid
exceeding the maximum wattage on the fixture(s) to
prevent any damage or hazards.
WN12
(Sold separately)
Main Line
Connect the wires using
