DIGIVAL User Manual
61
16.2 Critical Errors
CE.1 Test Device Read Failure
Error: Test device read failure.
Action: QC test is invalid. Restart QC test procedure using new test device.
CE.2 Calibration Check Card Read Failure
Error: Calibration Check Card read failure.
Action: Close drawer and restart Calibration Check Card procedure. Refer to
Section 6, "DIGIVAL Calibration" for instructions.
CE.3 DIGIVAL
™
Instrument Fault
Error: DIGIVAL Instrument Fault.
Action: Restart DIGIVAL and try again. If the error persist, make note of the
fault code displayed and contact Abbott Technical Support.
CE.4 Update Failed
Error: Software update failed.
Action: Please remove USB memory stick and restart update process. If
problem persists, please contact Abbott Technical Support.
16.3 Warnings
W.1 Memory Almost Full
Warning: Memory almost full.
Action: Export test history to USB memory stick or tap OK to continue. You
will need to complete the export and then delete all tests in the memory. See
Section 12, "Test History."
W.2 Memory Full
Warning: Memory is full. This warning applies for Patient Tests and QC Tests.
Action: Export test history to USB memory stick or tap OK to overwrite the
oldest test.
W.3 Auto Log Out
Warning: Operator will be automatically logged out.
Action: Tap Cancel to return to home screen.
W.4
DIGIVAL
™
Restart Required
Warning: The DIGIVAL will restart to activate new language setting.
Action: Tap OK to continue. Tap Cancel to stop activation of new language.
Tap
Home to stop activation of new language and return to home screen.
Summary of Contents for DIGIVAL LFR-024
