Appendix A: Product Specifications
Storage and Excursion Temperature Specifications
Store the components in this kit according to the following recommended conditions.
Table 1. Recommended storage and excursion conditions for components
Long Term Storage Temperature
Store at 23°C or 73°F
Temperature Excursions
Excursions below 15°C (59°F) or above 30°C (86°F)
should be <24 hours in duration
Excursion Temperature Limits
-20°C (-4°F) to 60°C to (140°F)
Product Materials
The following materials are intended to come into contact with tissue.
Table 2. Product materials for generator kit
Component
Material
Generator
Titanium, silicone rubber, epoxy resin
Pocket sizer
Polybutylene terephthalate
Port plug
Polyether ether ketone (PEEK) with barium sulfate
NOTE: These components are not made with natural rubber latex.
Generator Specifications
The Eterna™ implantable pulse generator has the following physical specifications.
Table 3. Generator specifications
Specifications
Model 32400
MR Conditional
Yes
Upgradeable features
Yes
BurstDR™ stimulation capable
Yes
Height
3.87 cm (1.52 in.)
Length
4.81 cm (1.89 in.)
Thickness
0.90 cm (0.36 in.)
Weight
26.4 g (0.93 oz)
Volume
13.79 cm
3
(0.84 in.
3
)
Power source
Rechargeable lithium ion cell battery
Connector specifications
Two 8
‑
channel connectors
In
‑
line, 2.54 mm (0.1 in.) spacing
Connector strength: 5N
Program storage capacity
16 programs with 8 stim sets each
11
Summary of Contents for Eterna 32400
