Step
Action
6
The Sensor Applicator is prepared and ready to
apply the Sensor .
7
Place the Sensor Applicator over the prepared
site and push down firmly to apply the Sensor to
your body .
CAUTION:
The Sensor Applicator now
contains a needle . Do NOT touch inside the
Sensor Applicator or put it back into the
Sensor Pack .
CAUTION:
Do NOT push down on the Sensor
Applicator until placed over prepared site to
prevent unintended results or injury .
Step
Action
3
Open the Sensor Pack by peeling the lid off
completely . Unscrew the cap from the Sensor
Applicator and set the cap aside .
4
Line up the dark mark on the Sensor Applicator
with the dark mark on the Sensor Pack . On a
hard surface, press down firmly on the Sensor
Applicator until it comes to a stop .
5
Lift the Sensor Applicator out of the Sensor Pack .
Lid
Cap
CAUTION:
Do NOT use if the Sensor Pack or
the Sensor Applicator seem to be damaged
or already opened . Do NOT use if past expiry
date .
21
22
ART41600-101_rev-A_manual.indd 21-22
ART41600-101_rev-A_manual.indd 21-22
10/7/20 2:55 PM
10/7/20 2:55 PM
