2. Discard the used Sensor following directions from your health care
professional. See
Maintenance and Disposal
. When you are ready to apply a
new Sensor, follow the instructions in
Applying Your Sensor
and
Starting Your
Sensor
. If you removed your last Sensor before it ended, go to "Start New
Sensor" in the menu to start the new one. You will be prompted to confirm
that you would like to start a new Sensor.
Note:
After removing your Sensor you may observe a slight bump at the
insertion site. This goes away quickly, usually in a day or two.
Replacing Your Sensor
Your Sensor automatically stops working after the wear duration and must be
replaced. You should also replace your Sensor if you notice any irritation or
discomfort at the application site or if your device reports a problem with the
Sensor currently in use. Taking action early can keep small problems from turning
into larger ones.
DOC44383_rev-C 1:14pm 22-SEP-2021