Product Overview
Reader
App
Sensor
Product Use
More Information
Checking Glucose with a Test Strip
How to do it:
Use your lancing device to obtain a blood drop and apply
blood to the white area at the end of the test strip. Refer to
your lancing device instructions for use if you need help using
your lancing device. If sounds are turned on, the Reader beeps
once to let you know you have applied enough blood.
You will see a butterfly on the screen while you wait for
your result. Do not remove the test strip while the
butterfly is on the screen. If sounds are turned on, the
Reader beeps once when your result is ready.
If the butterfly does not appear, you may not have
applied enough blood to the test strip. Apply a second
drop of blood to the test strip within 5 seconds of the
first drop. If the butterfly still does not appear or if more
than 5 seconds have passed, discard the test strip. Turn
off the Reader and repeat the steps in this section with a
new test strip.
Previous
|
Next
Caution
Test on your fingers in accordance with the Intended Use.
Intended Use
The FreeStyle Libre Reader's built-in meter is for use outside the
body only (in vitro diagnostic use) in the quantitative
measurement of glucose in fresh whole blood for self testing by
lay users from the fingers. It is not intended to be used for testing
neonatal blood samples or for the diagnosis or screening of
diabetes.
The FreeStyle Libre Reader's built-in meter is indicated for the
home (lay) user in the management of patients with diabetes. It is
intended to be used by a single person and should not be
shared.
The FreeStyle Precision Neo Blood Glucose Test Strips are for
use with the FreeStyle Libre Reader's built-in meter to
quantitatively measure glucose (sugar) in fresh capillary whole
blood samples drawn from the fingertips.
Summary of Contents for FreeStyle Libre
Page 64: ...Previous Next ...