1-1
Questions?
Refer to Page 10-9 For Technical Support Instructions.
Intended Use
The Precision Xceed Pro Point of Care System for Blood Glucose Testing is intended for
in vitro
(outside the body)
diagnostic use for the quantitative measurement of glucose in fresh capillary whole blood. The Precision Xceed Pro
System is for home (lay user) or professional use. The Precision Xceed Pro System is not for use in diagnosis or screening
of diabetes mellitus, but is to be used as an aid in monitoring the effectiveness of diabetes control programs. The
Precision Xceed Pro System may also be used by healthcare professionals for the quantitative measurement of glucose in
venous, arterial or neonatal whole blood, provided the sample is used within 30 minutes.
The Precision Xceed Pro System simplifies point-of-care testing for healthcare professionals, providing features that
enhance the reliability of the testing process and that support compliance with point-of-care policies.
TrueID
Easy Data Entry
Choose between the built-in barcode scanner and the alphanumeric keypad for entering
data as required by point-of-care policy. The monitor can be configured to accept patient
identification, operator identification, test strip lot number, comment code, and up to two
free text fields for other data such as physician name.
Patient ID Confirmation
The monitor can display the patient name, date of birth and gender for confirmation,
supporting positive patient identification procedures. Entry of the year of birth also can be
required for confirmation.
Data Integrity
Many options are available to help ensure that correct data is collected with each test
including: specifying the minimum and maximum length of an ID, restricting the types of
bar codes to be accepted, using a check digit to verify the bar code, or requiring repeated
entry of data on the keypad if the bar code scanner is not used. The monitor also records
the method of patient and operator identification data entry (scanned versus manually
entered on the keypad) to help Point of Care Coordinators identify and correct errors.
TrueMeasure
Fast, Simple Testing
To perform a test, simply insert a strip into the monitor’s port, apply a small drop of blood
and wait for the countdown to complete. For convenience, the sample may be applied to
either the top or end of the test strip. The test will not start until adequate sample has been
applied.
Simple Calibration
Scanning the barcode label on each test strip foil packet prior to use automatically
calibrates the monitor and checks the expiration date, helping ensure reliable and accurate
test results. Testing can also be restricted to approved strip lots.
QC Lock-out
The monitor can be configured to require periodic testing using control solutions, and to
lock out access to the system if these tests are not completed. QC results can be displayed
as pass/fail only, preventing patient testing while in control test mode.
TrueAccess
Operator Management
Access to the monitor can be restricted to certified operators, locking out untrained users.
A warning can also be displayed to an operator whose ID is set to expire in the near
future.
Results Storage
The Precision Xceed Pro monitor can store up to 2,500 patient test results and 1,000
control test results, in addition to 20 proficiency test results and 1 linearity panel. All
stored data can be automatically uploaded to the data management system using the
docking station (optional) or a data upload cable (optional).
Network Connectivity
Precision Xceed Pro Monitors can upload data and be configured via a central data
management system, across the organization’s computer network. This provides a simple
and automated way to manage multiple instruments, monitor point of care testing, and
report test data to the Laboratory Information System (LIS) or Hospital Information
System (HIS) for inclusion in the patient's Electronic Medical Record (EMR).
Overview
Chapter 1: Overview
