ABC Design High Tower, Nstructions For Use

EN

 - 04

1. Assembling the frame

a) Remove the frame from the packaging.

    Press both red catches on the rear of the high-chair frame at the same time and push the sliding fittings 

    down until they click into place.

b) Attach the plastic base fittings to the front and back of the frame. Secure the base fittings with the 

    screws provided. 

WARNING:

 Ensure that all the catches are engaged before use.

2. Attaching the seat

a) Place the seat unit on the high-chair frame.

    Secure the seat by inserting the stabilising rod in the opening provided and attaching it at the other 

    end with the clip supplied. 

b) Attach the footrest on the bracket from above. 

3. Attaching the castors and feet

a) Fit the two castors on the rear chair base.

    The castors are fitted with braking devices.

b) Fit the two feet on the front chair base.

4. Attaching the tray

Move both tray attachment arms on the seat unit into horizontal position.

a) Pull the catch on the underside of the tray. Stand facing the chair and push the tray onto the attachment

    arms. 

    The tray has three position settings.

b) The tray can be taken off and stowed on the back of the high-chair on the red catches.

5. Adjusting the angle of recline 

Pull the lever on the rear of the backrest. The seat can now be set in one of three different positions.  

The angle of recline can also be adjusted when your child is in the seat. 

6. Adjusting the height of the seat 

Press the two red catches on the front of the high-chair at the same time. Move the seat to the required 

height and fix into place by releasing the red catches again. 

7. Folding the high-chair

Remove the tray and attach it to the rear of the high-chair (see point 4 b). 

Press both red catches on the rear of the high-chair at the same time and push the sliding fittings up until 

they are fully engaged. This collapses the frame so that it can be folded up. 

WARNING:

 Ensure that all the catches are engaged before use.