GB 22
Press the OPEN/CLOSE button( ), place s disc on the disc tray with the printed label side up, and then
press the OPEN/CLOSE button( ) to close the disc tray.
The display will show
“
BUSY CD
”
and the disc is reading. Waiting until the reading is complete before
next step.
NOTE: Make sure
“
NO TOC
”
and
“
CD-R
”
(or
“
CD-RW
”
) indicators lights to the display, otherwise the
RECORD function will not work.
5. Select the mode of the track number assignment.
A. Manual mode
–
select tracks manually
The unit doesn't divide tracks.
The unit will record the next track when you press the TRACK INCREMENT button every time.
Maybe the current track doesn't finish the recording, but if you press the TRACK INCREMENT button,
the unit will record the next track.
B. Auto mode
–
select tracks automatically.
If you are busy, select tracks automatically division assignment with AUTO MANUAL button, when
the sound level has dropped below the -20db/-30db/-40db(record signal) for more than 2 seconds,
the current track will automatically stop, and record another one. And you only can set a sort of
record signal every time.
Record a disc in
“
-20db
”
mode;
Record a tape in
“
-30db
”
mode;
Record a external source in
“
-40db
”
mode;
In track increment automatically mode, don
’
t adjust the REC LEVEL by will. To adjust REC LEVEL so
lower that error track increment, to adjust REC LEVEL so high that can
’
t track increment.
6. Press the RECORD button.
“
REC
”
and ( ) will appear on the display.
·
No button will work while
“
busy
”
is displayed. Wait a few seconds until
“
busy
”
disappear from the
display.
