background image

 

75 

 

TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER

 

                                                    

                 

                                                                                         

 

 

 

 

 NOTE: 

Turn the key to the "REG" (REGISTER) position for registering sales transactions. 

  IMPORTANT: 

It is not necessary to press the Decimal Point when ringing up a price. 

  

REMINDER:

  If Clerk Numbers are programmed, be sure to 

ENTER

 the 

(CLERK #)

, then 

PRESS

 the  

 

 

[CLERK]

 key before ringing up a sale. 

 

In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Department 2 is 
programmed for no tax and Clerk #1 is used. 
 
 
EXAMPLE 13:

 DEPARTMENT

 - (Assume the DEPT 99 is preset for the price of $1.00.  Ring up the DEPT  

# 99): 

 
 

 

 

 

 

1. 

ENTER (99)

, then 

PRESS

 the 

[DEPT]

 key. 

DEPT99   

1.00 

2. 

PRESS 

the 

[AMOUNT TEND/TOTAL] 

key 

ITEM CT 

 1 

 

 

 

 

CASH  

1.00 

 

.  

 

 

 

 

 

 

 

 

 

 

 
EXAMPLE 14:

  EXEMPTING TAX ON AN ITEM

 - (Assume the Department 1 key is programmed as a taxable 

department.  Ring up a $1.00 item in Department 1 without charging tax): 

 
 
 1.

 PRESS 

the 

[NON TAX]

 key. 

DEPT01 

 

1.00 

 2.

 ENTER 

(100)

, then 

PRESS

 the 

[DEPARTMENT 1]

 key. 

ITEM CT 

            1 

 3.

 PRESS 

the 

[AMOUNT TEND/TOTAL] 

key. 

CASH  

1.00 

 
 
EXAMPLE 15:

  ADDING TAX TO A NON TAXABLE DEPARTMENT

 - (Assume the Department 2 key is 

programmed for no tax and the Department 1 key is programmed with a 6% TAX 1 tax rate.  Ring 
up a $1.00 item in Department 2, charging the 6% tax rate): 

 
 
 1.

 PRESS

 the 

[TAX 1]

 key. 

DEPT02     

1.00 

 2.

 ENTER 

(100)

, then 

PRESS

 the 

[DEPARTMENT 2]

 key. 

ITEM CT 

            1 

 3.

 PRESS

 the 

[AMOUNT TEND/TOTAL] 

key. TAX 

 

0.06 

 

 

 

 

CASH  

1.06 

 
 
 

abcoffice

www.abcoffice.com                 1-800-658-8788

Summary of Contents for Alpha9155sc



























































































































Reviews: