abc 23kW SUPER VULCANO, User Manual

12. PELLET LOADING CORRECTION 

This function shall be used to fine tune the pellet power. If the power 5 
is too high and power 4 insufficient, the power shall be corrected from 
5 to - 1,2,3 so as to obtain the power between 4 and 5. 

Press       on the main screen.

Press “Combustion Management” and then “Auger Calibration” 

     or      increase or decrease the value from 0 to 5. To return to the

Home screen press 

18

NOTE:

If the pellet loading correction is to be made it is also necessary to
correct  the  fan  speed  “Fan  Calibration”.  Should  the  pellet 
correction be + the fan correction must also be + for the same value. 
The  stove  is  factory  set  for  flawless  operation.  Should  the  high 
quality pellets be used, there will be no need to make corrections.

13. CLEANING AND MAINTENANCE

Basic Information

The stove must be off and completely cooled before starting any
cleaning and maintenance activity.

The stove cleaning and maintenance intervals primarily depend on the
pellet quality. The wet pellets contain a high percentage of ash, dust 
and unburned residues, which double the cleaning and maintenance
intervals. Therefore, we would like to emphasize once again that only
attested and certified pellets shall be used. The stove is equipped with 
a removable handle for opening the firebox door. Having closed the 
door, the handle shall be laid next to the stove in order to prevent the
possibility of door opening during the operation as well as handle
overheating. Cleaning is divided into three categories: 

Daily, Weekly

and Monthly.