6
7
GENERAL SAFETY
WARNING! Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and / or serious personal injury. The term Surefog Pro
360 ULV Fogger in all of the warnings listed below refers to your mains-operated (corded) sprayer.
WORK AREA
+ Keep your work area clean and well lit.
+ Do not operate your Surefog Pro 360 in explosive atmospheres, such as in the
presence of flammable liquid, gases, or dust.
+ Keep bystanders, children, and visitors away while operating your Surefog Pro 360.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
+ Fogger plugs must match the outlet. Never modify the plug in any way.
+ Do not expose your Surefog Pro 360 to rain or wet conditions.
+ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the fogger. Keep the cord away from heat, oil, sharp edges or moving parts.
Replace a damaged cord immediately.
Damaged or entangled cords increase the risk of electric shock.
+ When operating a Surefog Pro 360 outdoors, use an outdoor extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
PERSONAL SAFETY
+ Stay alert, watch what you are doing and use common sense when operating your Surefog Pro
360 ULV Fogger. Do not use while you are tired or under the influence of drugs, alcohol, or
medication. A moment of inattention could result in personal injury.
+ Always wear the appropriate PPE as required by the facility being sanitised.
+ Avoid accidental starting. Ensure the switch is in the off position before plugging in.
+ Do not overreach. Keep a proper footing and balance at all times.
HOSES
+ Tighten all of the fluid connections securely before each use.
+ Only use hoses with a spring guard. The spring guard helps protect the hose from
kinks or other damage which could result in hose rupture and cause an injection injury.
Do not allow kinking or crushing of hoses or allow it to vibrate against rough, sharp or
hot surfaces.
+ NEVER use a damaged hose, which can result in hose failure.
Before each use, check entire hose for cuts, leaks, abrasions, bulging of the cover,
or damage or movement of couplings. If any of these conditions exist, replace the
hose immediately.
+ NEVER use tape or any device to try to mend the hose.
