Http://www.abe-hk.com
Environmental
friendly
Index
!
!
!
A/C Adapter and 3 AAA battery
Turning on / Turning off the Traveller Speaker
Function Keys
To turn on the speaker, please switch the power ON/OFF switch to the “I”
position. To turn it off, please switch the power switch to the “O” position.
Thank you for buying the new BT90S
Traveller Speaker and, or the
CS8082
Stereo Audio Adaptor. You can use the A/C power adapter
(optional, not provided) to power up the CS8042 directly or place 3 AAA dry
batteries into the CS8042 to obtain the power.
Bluetooth
Bluetooth
I.Traveller Speaker paired with Bluetooth enabled (with A2DP and
AVRCP profiles) Mobile Phone / PDA / MP3 Guide
1. Battery cover(Insert 3 AAA batteries).
2. Power ON/OFF switch.
3. DC power input socket(5VDC).
4. Audio input socket.
5. Backward switch.(only applied to audio devices supporting A2DP and AVRCP
Profiles)
6.
Volume Down switch.
7. Forward switch. (only applied to audio devices supporting A2DP and AVRCP
Profiles)
8.
ON/OFF/Pairing/Pause switch.
a) When CS8042 is powered on, press and hold (about 2 seconds) until
LED flashes Green to turn
ON.
b) When CS8042 is powered on, press and hold (about 4 seconds) until
LED flashes Green and Red alternatively to enter into pairing mode.
c) When CS8042 is powered on, press and hold (about 4 seconds) until
LED turns red to turn
OFF when playing.
d) Press it once when playing --- Pause
Press it once again --- Resume play
9.
Volume Up switch.
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
10. a)
LED flashes Green --
is ON
b)
LED flashes Green and Red alternatively --
enters into
Pairing mode
c)
LED is red --
will be powered OFF
11. Power LED is Blue -- BT90S is Power ON
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
1
2
3
CS8042
Traveller Speaker
And
CS8082
Audio Adaptor (optional)
User Manual
Bluetooth
Bluetooth
THREE possible User Scenarios
1.
A/C Adapter and 3 AAA battery...............................................................1
2.
Turning on / Turning off the Traveller Speaker and the Audio Adaptor.........1
3.
Function Keys......................................................................................1
.........................................................................2
.
Traveller Speaker paired with
enabled (with A2DP and AVRCP
....................
.
...........
..............
....
.
...............
.
................
.............
I
Bluetooth
profile) Mobile Phone / PDA / MP3 Guide.............
.......2
1.Pairing..................... ............
.................................................3
2.Listening to music.................
...........
................................3
. Traveller Speaker paired with Stereo Audio Adaptor CS8082 Guide..... .....4
1.Pairing.............................
........................................ ..........4
2.istening to music......................
........................................5
. Tr a v el ler Speaker connected directly with Audio Device Guide................5
1.listening to music..............................................................................5
Accessories Table...............................................................................5
FCC Interference Statement.........................
..................................6
II
III
When you purchase a Standalone pack with CS8042 Traveller Speaker only,
please follow this Guide.
1. Pairing
a. While the Speaker is powered off, switch the power ON/OFF switch (Key
2) to the “I” position to turn it on (Fig.1).
The Power LED (Fig.3) will
become blue. Press and hold BT ON/OFF/Pairing/Pause switch (Key 8,
Fig.2) for 4 seconds, the
LED will flash red and green
alternatively, which indicates the Speaker in Pairing Mode. The Pairing
Mode will last for one minute.
b. Put the Speaker and the
enabled (with A2DP and AVRCP
profiles) Mobile Phone / PDA / MP3 close to each other, 0.5 to 3 meters.
c. Follow the operation instructions of your
enabled (with A2DP
and AVRCP profiles) Mobile Phone/ PDA / MP3 to start the pairing
process. Typically, this has to be done by going to a setup or connect
menu to discover the Speaker. It may take some time to search it
depending on the number of
devices nearby.
d. Your Mobile Phone / PDA / MP3 will display the model name “CS8042 if it
has found the Speaker; and ask for a passkey.
Enter a sequence of
“0000 . After successful pairing, follow the instructions to establish the
connection with the Speaker.
e. If the pairing is successful, the
LED will flash green, which
indicates it is in Standby Mode and ready to receive audio signals from the
Mobile Phone / PDA / MP3. If pairing does not occur as expected, turn the
Traveller Speaker and the audio device off.
Wait for 10 seconds and
repeat the pairing process from the beginning (Fig.4).
2. Listening to music
a. Play the music on the Mobile Phone / PDA / MP3 as normal; you will listen
to the music from the Speaker.
b. The speaker volume can be adjusted by pressing the VOL Up button
(Fig.2) / VOL Down button (Fig.2).
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
”
”
Bluetooth
mobile phone
Bluetooth
enabled PDA
Bluetooth
Traveller Speaker
(Fig.1)
(Fig.2)
(Fig.3)
(Fig.4)
