Environmental
friendly
User Manual
1
Table of Contents
1.
BT77AD profile and its functions..........................................3
1.1. Profile.................................................................................3
2
How to set up the BT77AD....................................................4
3.
How to mount the BT77AD in the car ...................................4
4.
LCD Display status ..............................................................6
4.1. On / Off and Pairing..............................................................6
4.2. Calling in.............................................................................8
4.3. Calling out..........................................................................9
4.4
On Line............................................................................... 10
4.5
Battery charging.................................................................12
5 .
.................................................14
6.
...........................................................................14
7.
..............................................................15
8.
..........................................16
Maintenance and Safe Use
Electrical
Package Contents
Federal Interference Statement
2
3
LD77A
BT 77AD
LCD SOCKET
LCD plug
Note: BT77AD is an optional feature .
Always avoid contact with humidity or heavy soiling.
Any use other than the one described above will damage the product. Moreover,
there is a danger, for example, short-circuits, fire, electric shock, etc. No part of
the product must be modified or rebuilt and the housing must not be opened!
Observe the safely instructions at all times!
All company names and product designations contained herein are trademarks of
the respective owners. All rights reserved.
4
1.
77A profile and its functions
BT
1.1. Profile(Fig.1)
2
Phone 1 icon
Phone 2 icon
3
Mute icon
4
Battery icon
1
6
Metal Stand
with 2-side tape
5
LCD plug(
BT77AD )
Fig. 1
5
2 How to set up the BT 77AD
Insert fully the LCD plug into the LCD socket of BT 77AD before the Carkit is turned
on. (please refer to figure 2-3.)
3.How to mount the BT77AD in the car
Use the Alcohol Pad to clean the surface of a desired position on the top of the
dashboard.
●
●
●
●
Use the 2-side tape to attach the metal stand on the cleaned area.
Put the BT77AD into an appropriate position(Refer to Fig.4)
Slide the LCD to the metal stand.
6
1.Attach the metal stand to the desired
position.
BT77AD
2.Place the BT77AD on the sun visor
.
3.Slide the LD77A LCD display into the
mental stand
.
Dashboard
Metal Stand
BT77AD
UNIT
Windshield
Air
suckers
LD77A
7
4. LCD Display status
When the LCD Display unit is properly connected to a Car Kit,it will provide you
with the status of the Car Kit’s operations. For detailed operations, please
refer to the appropriate
user manuals.
4.1. On / Off and Pairing
Car Kit
After the car kit has been powered
on, it will stay on idle. Before it is
connected to the mobile phone,the
LCD screen displays “READY”.
When the Car Kit is in pairing mode,
the LCD screen displays “PAIRING”
S1
S3
S3
S4
S1
S3
S3
S4
8
While the car kit is connecting to the
mobile phone, the LCD screen disp-
lays “CONNECTING .
”
After the car kit has connected to the
mobile phone successfully, the LCD
screen displays “CONNECTED”.
If you press the ON / OFF key for about
5 seconds to turn off the car kit,the LCD
screen displays“OFF for a few seconds
before it is completely off.
”
S1
S3
S3
S4
S1
S3
S3
S4
S1
S3
S3
S4
Fig. 2
LCD Only(
)
Car Charger Only
(
)
Fig. 3
Fig. 4
The backlight will be on automatically for 10 seconds when there is an incoming call or
when any key operations are performed directly from the car kit.
key operations are performed from the mobile phones.
Note that the backlight
will not be turned on when
TM
Bluetooth Handsfree Car Kit
with LCD Display
®
CS8106(BT77AD)
Abe/CS8106
4.2. Calling in
When there is an incoming call, the LCD
screen displays “RINGING”, or its caller
ID, if it is received.
Note: Some mobile phones may not
display Caller ID via this LCD Display
unit.
When the call is answered, the LCD
screen displays“ON LINE”.
If the call is rejected, it will go back to
idle state and the LCD screen displays
“CONNECTED”.
Or Caller ID
S1
S3
S3
S4
S1
S3
S3
S4
S1
S3
S3
S4
S1
S3
S3
S4
CS8106 / Abe
