Industrial Tracker Reference Guide FW 1.8 V0.2
6.11 Event message
It notfes generic events.
Common header
Data
Additonal data with Event value=0x02
Byte 0i4
Byte 5
Byte 6i7
Byte 8i9
Byte 10i11
Header tith Type=0x0A
Event Value
X axis
Y axis
Z axis
Event Value:
0x00:
geolocaton start
message: If actvated (bit 6 of
config_flags set
), the event message is
sent then the tracker begins a geolocaton
0x01:
moton_start
message: If actvated (bit 8 of
config_flags set
), the event message is
sent then the tracker begins a moton.
0x02:
moton_end
message: If actvated (bit 9 of
config_flags set
), the event message is sent
then the end of a moton is detected.
Additonal data
: provides the orientaton of the tracker (only valid in
moton_end
messages). The
orientaton can be negatve, refer to the secton
the encoding)
X axis
: X axis accelerometer value in mG
Y axis
: Y axis accelerometer value in mG
Z axis
: Z axis accelerometer value in mG
Page 29 of 46
10th July 2019
Restricted distribution