Industrial Tracker Reference Guide FW 1.8 V0.2
7.2 Operatonal mode configuraton
The operatng mode can be remotely confgured tith a dotnlink LoRa message built as follot:
Byte 0
Byte 1
Byte 2
0x02
ACK
Mode
ACK
: Acknotledge token. Refer to the secton
Max value is 0x0F.
Mode
: operatng modes. Acceptable values are:
0i Standby
1i Moton tracking
2i Permanent tracking
3i Moton start/end tracking
4i Actvity tracking
Example
Changing the operatng mode to “moton track” (01) tith an ack token of 3:
0x020301
.
7.3 Positon on demand
Whatever the state, a positon can be requested from the tracker using the message:
Byte 0
Byte 1
0x01
ACK
ACK
: Acknotledge token. Refer to the secton
Max value is 0x0F.
Example
Positon on demand message tith ack token of 2:
0x0102
.
The tracker till anster tith a positon message.
7.4 Request device configuraton
Byte 0
Byte 1
Byte 2-21
0x03
ACK
Parameter ID list (optonal)
ACK
: Acknotledge token. Refer to the secton
Max value is 0x0F
.
Parameter ID list
: List of requested parameters identfers.
Each single byte contains a single identfer.
Parameter IDs are the one used to confgure the device (see secton
).
Special parameters (described belot) can be requested.
The list can be empty. In this case, all parameters are requested.
Page 31 of 46
10th July 2019
Restricted distribution