Industrial Tracker Reference Guide FW 1.8 V0.2
Special parameter Id:
Tracker orientaton:
o
0xFA: X axis accelerometer value in mG
o
0xFB: Y axis accelerometer value in mG
o
0xFC: Z axis accelerometer value in mG
provides the orientaton of the tracker on each axis. The orientaton can be negatve, refer to the
secton
for informaton about the encoding)
Firmtare version:
o
0xFE: get the frmtare version.
Notes
1i The tracker ansters this request tith a Confguraton uplink message (secton
).
2i Each uplink can contain up to 5 parameters.
3i If the number of parameters is greater than 5, the tracker till send the needed number of
uplinks to fulfll the request.
7.5 SOS mode configuraton
Turn on SOS mode of the tracker:
Byte 0
Byte 1
0x04
ACK
Turn of SOS mode of the tracker:
Byte 0
Byte 1
0x05
ACK
ACK
: Acknotledge token. Refer to the secton
Max value is 0x0F.
to have more informaton about the SOS mode behavior.
7.6 Parameters configuraton
Any parameter can be remotely modifed tith a dotnlink LoRa message. Such messages are built
according to the folloting format:
Byte 0
Byte 1
Byte 2
Byte 3-6
0x0B
ACK
Parameter ID
Net value [31i00]
It is possible to modify up to 5 parameters in the same message by using the folloting format:
Parameter 1
Parameter 2
Byte 0
Byte 1
Byte 2
Byte 3-6
Byte 7
Byte 8-11
0x0B
ACK
ID
Net value1 [31i00]
ID
Net value2 [31i
00]
ACK
: Acknotledge token. Refer to the secton
. Max value is 0x0F.
Page 32 of 46
10th July 2019
Restricted distribution