Abekas Diskus Manual Download

Page: 442 / 480

}

write(sd, "", 1);

/* send the final null */

n = read(sd, tmp_str, 20);

#ifdef DEBUG

printf("read %d\n", n);

#endif

}

rcpFrom(int sd, FILE *piccy, int frame)

{

char line[PIXELS*CHANNELS];

char str[80], tmp_str[30];

int i, n, chunk, length;

sprintf(str, "rcp -f %d\n", frame);

write(sd, str, strlen(str));

write(sd, "", 1);

/* send a null */

n = read(sd, tmp_str, 30); /* get the file
info */

#ifdef DEBUG

printf("read %d\n", n);

#endif

write(sd, "", 1);

/* send a null to start

transfer */

i = 0;

length = LINES*PIXELS*CHANNELS; /* should really
get length from file info */

File Formats

Diskus Technical Guide

12-24

Appendix

9100-0217-02 - SEP 95

Summary of Contents for Diskus

































































































































































































































































































































































































































































































Search results

Summary of Contents for Diskus

Reviews:

Related manuals for Diskus

Brands by name

Popular brands

Abekas Diskus, Manual

Search results

Summary of Contents for Diskus

Reviews:

Related manuals for Diskus

Brands by name

Popular brands