65
38
64
Adjusting the chronograph hands to zero position
Example:
One or several chronograph hands are not in their correct
zero positions and have to be adjusted (e. g. after battery
change).
1
Pull out the crown to position III (all
chronograph hands are in their correct or
incorrect zero position).
2
Keep push-buttons A and B depressed simultane-
ously for at least 2 seconds (the second counter
hand 360°
➠
corrective mode is activated)
Adjusting the second counter hand
Single step: Press A briefly once
Continuous: Long press A
Adjusting the next hand: Press B
Adjusting the 1/10 second counter hand (No. 6 h)
Single step: Press A briefly once
Continuous: Long press A
Adjusting the next hand: Press B
Adjusting the minute counter hand (No. 9 h)
Single step: Press A briefly once
Continuous: Long press A
Adjusting the next hand: Press B
3
Press crown back into Position I:
Conclusion of the resetting of the chronograph hands
(May be done at any time.)
Minute counter
1/10 second counter
Centre stop
second
Button B
Button A
Basic function (Start / Stop / Zero position)
Example:
1
Start: Press Button A
2
Stopp: to stop the timing, press Button A once
more and read the 3 chronograph hands:
4min/38sec / 7⁄10 sec
3
Zero position: Press Button B.
(The chronograph hands will be reset to their
zero positions.)
Intermediate timing
Example:
1
Start: (start timing)
2
Display intermediate time:
e. g. 10 min. 10 sec. (timing continues in the
background)
3
*Making up the measured time:
(The three chronograph hands are quickly
advanced to the ongoing measured time.)
4
Stopp: (Final time is displayed.)
5
Zero position:
The 3 chronograph hands are returned
to their zero position.
Note:
*Following
3
further intervals or intermediates
can be displayed by pressing Button B (display
interval / make up measured time, ...).
Minute counter
Minute counter
1/10 second counter
1/10 second counter
Button A
Button A
Button B
GB