Abelko IMSE UltraBase40 Quick Start Manual Download

Page: 4 / 4

www.abelko.se

Analog inputs

There are eight analog inputs marked

. Input 1-4 can measure 0-10 V. Input

5-8 can measure 0-20 mA.

Digital inputs

There are eight digital inputs marked

. Digital inputs can be used for

digital status. In addition to this, inputs 1-4 can be used as counters and for

frequency measurement.

Cleaning

The housing is cleaned from dust and dirt using a dry cloth. Do not use

chemicals.

Recycling

UltraBase40 should be recycled as electronics.

Repair and service

Reparation and service shall always be performed by Abelko Innovation.

Contact your distributor first if the need arises.

Manuals, updates and other information are available at

www.abelko.se

Active 1-10 V sensor

4-20 mA sensor

Summary of Contents for IMSE UltraBase40

Page 1: ...is carried out by a qualified electrician Cables must be fastened and secured so that no risk for injury or fire exists Ventilation openings in the devise housing may not be covered A circuit breaker...

Page 2: ...enhanced isolation class II from power mains or other dangerous voltage source 50 VAC or 75 VDC Note that all cables used must be approved for at least 50 C ambient temperature At high ambient tempera...

Page 3: ...u need to accept and add this exception The procedure differs depending on which browser you are currently using The communication is still encrypted so no one can see for example which passwords are...

Page 4: ...uts 1 4 can be used as counters and for frequency measurement Cleaning The housing is cleaned from dust and dirt using a dry cloth Do not use chemicals Recycling UltraBase40 should be recycled as elec...