User Manual - ABES Bicycle-Stand 480
Installation and maintenance instructions
_________________________________________________________________________________________________________________
Page 6
A
BES S.À R.L.
48, RUE GABRIEL LIPPMANN
|
L
-6947 NIEDERANVEN
|
FON
+352 28 67 65 01
|
FAX
+352 28 67 65 20
OFFICE@ABES-ONLINE.COM
|
WWW.ABES-ONLINE.COM
Maintenance, repairs and disposal
In summer and in winter, every screw joint has to be checked and, if need be, tightened
to ensure the stable connection between all the components.
The bicycle parker has a modular structure. Depending on the damage extend, affected
components can be removed and replaced. Spare parts can be requested and ordered
from the manufacturer. To contact the manufacturer, refer to chapter
Manufacturer Da-
ta
or T
echnical Support
.
The disassembly happens in reverse order (see chapter
Assembly
).
The construction is made entirely of metallic components that can be disposed of at the
scrap metal collection and then recycled. Ask your local waste disposal company for the
location of collection sites near you.
Transport and storage
The construction is delivered disassembled. It can be stored and transported in a loose or
in an assembled state. Bicycle stands packed ex factory are not stackable. For the
product’s dimensions refer to chapter
Dimensions
.
Identification
Every bicycle stand bears a facto-
ry label with the following in-
formation:
Technical support
office@abes-online.com
+352 28 67 65 01
www.abes-online.com
