Quick Hitch Adapter operation:
After completing assembly of the adapter, the tractor lift arms should be raised and
locked in a position so the floating yokes are horizontal. Ensure that the M16x60 bolt is
approximately in the center of the slot on the floating yoke. Positioning the bolt in this
location allows the mower to have maximum float both up and down.
CAUTION: Improper setup of the quick hitch adapter can result in equipment
damage. A replacement driveline must generally be installed to prevent injury or
equipment damage when using the quick hitch adapter.
CAUTION: If the three point hitch of the tractor is set in the lowest position, the
driveline may bottom out against the quick hitch resulting in a bent driveline. If
the mower is lifted after the driveline has been bent, it may also damage the
gearbox, mounting plates and other hardware.
O
PERATION
22
ABI A
TTACHMENTS
F
INISH
M
OWER
O
PERATOR
’
S
M
ANUAL
Summary of Contents for ACYCMO72
Page 35: ...WARRANTY ...
Page 38: ...FINISH MOWER FRAME OPERATOR S MANUAL PARTS MANUAL 2 ABI ATTACHMENTS 06 2015 ...
Page 42: ...FINISH MOWER TRANSMISSION SPINDLE OPERATOR S MANUAL PARTS MANUAL 6 ABI ATTACHMENTS 06 2015 ...
Page 50: ...FINISH MOWER DECALS OPERATOR S MANUAL PARTS MANUAL 14 ABI ATTACHMENTS 06 2015 ...