Every 8 hours:
1.
Lubricate the driveline (see fig. 8) and the wheel yokes (see fig. 9):
Apply two or
three shots of grease to the driveline cross and bearings and to the inner and outer
locking rings; apply the same amount to the wheel arm grease fittings. See the
driveline manufacturer operator’s manual for further information on the driveline.
2.
Gearbox oil level:
Check gearbox oil level, it should be between
1
/
2
and
2
/
3
full. If
needed add either SAE 90 wt. or SAE 140 wt. gear oil.
Every 20 hours: Lubricate the driveline telescoping shafts:
Apply a thin film of
grease on the inner tube of the driveline
(see fig. 8)
.
Every 25 hours: Check hardware tightness;
mower vibrations can loosen bolts.
Check tightness of the hardware periodically, using
Table 1
as a guide
10
.
M
AINTENANCE
25
ABI A
TTACHMENTS
F
INISH
M
OWER
O
PERATOR
’
S
M
ANUAL
10
See Table 1, Torque Specifications, page 31.
Fig. 9
Wheel yokes lubrication.
Fig. 10
Lubrication of the spindle
shafts easily accessible from
the top of the deck.
Summary of Contents for ACYCMO72
Page 35: ...WARRANTY ...
Page 38: ...FINISH MOWER FRAME OPERATOR S MANUAL PARTS MANUAL 2 ABI ATTACHMENTS 06 2015 ...
Page 42: ...FINISH MOWER TRANSMISSION SPINDLE OPERATOR S MANUAL PARTS MANUAL 6 ABI ATTACHMENTS 06 2015 ...
Page 50: ...FINISH MOWER DECALS OPERATOR S MANUAL PARTS MANUAL 14 ABI ATTACHMENTS 06 2015 ...